Best Buy - 10 Best Stabilizer for 1.5 Ton Ac in India (Oct 2023)

Best Buy

10 Best Stabilizer for 1.5 Ton Ac in India (Oct 2023)

Sourabh Raikwar

October 1, 2023 17:57

1093 Views 0

Stabilizers are critical safety components that protect your air conditioners from voltage fluctuations, power surges, and other electrical disturbances. Voltage fluctuation is a common problem in industrial and rural areas, and it is primarily caused during the summer.

If you have a 1.5-ton air conditioner, you’ll need a stabilizer to keep it running smoothly and efficiently.

The main reason to buy a stabilizer for your 1.5-ton AC is that most air conditioner manufacturers do not provide warranty or replacement due to voltage fluctuations.

Even if the stabilizer manufacturer claims that the AC does not require a stabilizer, it can still be fused or damaged. As a result, it is preferable to consider a stabilizer against low and high voltage fluctuations.

It’s worth noting that a 1.5-ton AC runs on 220 volts, so keeping this voltage range stable is critical. Because the air conditioner, compressor, and PCB are all extremely voltage-sensitive. Our experts have recommended the top ten best stabilizers for 1.5-ton non-inverter ACs in India.

Our Top 3 Recommendations

• Microtek EM4130+ Automatic (Best Buy)
• Monitor (100% Copper) (Affordable)
• Candes Crystal 4kVA for 1.5 Ton AC (High Voltage Fluctuation)

What to look for in a Voltage Stabilizer while buying one!
While buying a Stabilizer you should check the capacity, voltage, current & power rating of the device. Mostly for India-specific regions, the voltage will be 230VAC, 50 Hz. let’s look at these key points that you should consider before buying an AC stabilizer.

• Type of Voltage Stabilizer
• Voltage Regulation Range
• Capacity
• Input and Output Voltage:
• Protection Features or Overload Protection
• Mounting & installation
• Time Delay Systems
• Display or Indicator.

These are some of the characteristics that a stabilizer should have.

Best Stabilizer for 1.5 Ton Ac in India 2023!

As a consequence, we compiled a list of the best stabilizers for 1.5-ton inverter ac with all significant options that are required, from which you may select based on your demands and the conditions in your region.

Here is the Best Stabilizer for 1.5 Ton Ac in India 2023!

V-Guard iD4 Ace 5540 Voltage Stabilizer

Specification:

This is the first AC stabilizer on our list of the Top 10 Best AC Stabilizers as the best stabilizer for 1.5-ton AC. This V-Guard iD4 Ace 5540 has a sleek and ergonomic wall-mounted design made of ABS. In three colors: blue, violet, and red, a digital display indicates whether the voltage input is desirable or not.

The blue light indicates that the input voltage is correct, the violet light indicates that the input voltage is less than 200 volts, and the red light indicates that the voltage input is high or low in terms of H and L and that the power should be cut. This Stabilizer can be used on both the wall and the surface.

The V-Guard iD4 Ace has low and high-voltage cut-off functions. When the voltage is out of range, this device will turn off the power to protect the AC unit from unstable electricity flow. It also detects the output voltage and manages a range of 200V-240V, which is an ideal range for running the AC without issue.

It has built-in thermal overload protection in case of an overload accident caused by component damage or an internal short circuit in the circuitry, PCB, or wiring, which can lead to overheating of your device. The Thermal Sensor function in the V-Guard iD4 ACE 5540 disconnects the power load.

Aside from that, it has some valuable features such as ITDS technology, which starts the AC compressor after some time (up to 3 minutes) to prevent frequent power outages, and it also uses the EMI filter, which saves from electromagnetic waves generated by other home appliances such as LED lights, electric motors, and computers, which causes problems in your ac compressor when it happens frequently.

Pros:

• Ergonomic design with the smart display.
• Low and high voltage cut-off.
• Smart output voltage correction.
• Intelligent Time Delay System (ITDS) (up to 3).
• Thermal overload protection.
• Sharp voltage control (SVC).
• A best-selling and best-rating AC Stabilizer.

Cons:

• No major cons.

Candes Crystal 4kVA for 1.5 Ton AC

Specification:

Another option on the list is the Candes Crystal 4kVA, which has a wide operating voltage range (input) of 90 to 290 volts (for wide voltage change) specifically for low voltage. This Candes Crystal is suitable for Inverter AC, Window AC, and Split AC up to 1.5 Ton (also 1 Ton, 0.75 Ton, 0.5 Ton).

It has copper winding and a voltage range of 90v to 290v, making it suitable for voltage fluctuations. It is a low-cost copper winding stabilizer when compared to other stabilizers.

Because the Candes Crystal stabilizer is made of mild steel, it can be used on both walls and outdoors.

The HMC Technology (Hybrid Memory Cube) is used in this Stabilizer to sense voltage fluctuations and react to particle situations, even cutting off the power with Auto Cut-off. However, it lacks Thermal Overload Protection, which I consider to be a disadvantage.

It operates when the current flow is overloaded, and the changes are visible on this three-digit digital display.

Surge protection is included with the Candes Crystal 4kVA. It works as a capacitor during low or normal voltage and reduces the voltage when voltage is voltage-clamping, thanks to its effective spike protection that works on metal oxide varistors.

Its Silver Caked Relay technology provides a wide input voltage range, allowing it to stabilize and deliver the optimum voltage required by the AC. It also manages low and high-voltage fluctuations to cut power to your home appliances and save them.

Pros:

• High and Low Voltage Cut-off protections.
• Digital Display.
• Intelligent Time Delay System.
• HMC Technology.
• Cost-Efficient Stabilizer.

Cons:

• The basic design.
• Lack of Thermal Overload Protection.

Microtek EM4130+

Specification:

Among the protection devices, Microtek is one of the best-selling AC stabilizers. The EM4130+ is a pro version of its predecessor, the MICROTEK EM4160, which was one of the best AC stabilizers for normal voltage fluctuation.

Because of the metal body of this Microtek EM4130+ and its ability to be mounted on a wall, you can use this stabilizer outside the home. It is built with 100% copper winding under the hood and has a working range of 130V-300V, making it a good AC protector in unusual power conditions.

Its Low & High Cut-Off protection allows you to cut off the power supply when it reaches the working range of this stabilizer, and its digital display allows you to see the voltage output and input value.

It has technology such as Silver Caked Relay, which regulates a wide range of voltage fluctuation, and Intelli Auto Start, which automatically adjusts the voltage fluctuation with steps up and steps down of voltage. It also has the ITDS, which supplies power with a time delay.

Pros:

• Advanced Seven Segment Digital Display
• Low and high voltage cut-off.
• Intelligent Time Delay System (ITDS).
• Thermal Overload Protection.
• A durable design.

Cons:

• Stabilize only 40v to 45v.
• No Overload Protection.

Everest EW 400 N Elegant Digi Double Booster Voltage Stabilizer

Specification:

Everest EW 400 N is the most affordable stabilizer, with a double booster and copper winding for less than Rs. 3000 and an input range of 150 V to 290 V. It has a voltage range of 200 – 240 V and a current rating of 14 amps. With this stabilizer, you can protect your AC from normal voltage fluctuations.

Everest EW 400 N is a wall-mountable stabilizer with an aluminum body. The EW 400 N employs Advanced IC Technology for sensing the lowest charge in voltage fluctuation, whereas Spike Protection maintains a constant voltage in your home even when it is used in a large application.

Toroidal Transformers technology, which is the most recent German innovation, isolates electronics from a voltage source and regulates the voltage to protect the air conditioner. Its advanced solid-state circuitry provides complete control over input and output voltage.

In this price range, this is a noise-free stabilizer. It also has a 3-minute initial time delay system and low and high voltage cut-off during voltage fluctuation, as well as thermal overload protection. The 7-segment Digital Display can show the low and high voltage output and input, as well as the overload cut-off.

Pros:

• Solid State Circuitry.
• Spike protection.
• Intelligent Time Delay System (ITDS).
• Thermal Overload Protection.
• Overload Protection.
• German Toroidal Transformers technology.
• Lightweight stabilizer.
• Silence Stabilizer operation.
• 7 Segment Digital Display.

Cons:

• Average build quality.

Monitor (100% Copper)

Specification:

Monitor (100% Copper) Voltage Stabilizer is the most affordable voltage stabilizer on the market, with a 100% copper winding that is suitable for both Windows and Split AC. It has a voltage range of 170V-270V. You can use this stabilizer if your AC needs an extra layer of protection.

Monitor 4-KVa has a metal body with an Epoxy Metal coating that provides resistance to temperature and corrosive substances, making it an outdoor stabilizer if used outdoors.

Because this is an entry-level stabilizer, don’t put too much faith in it. Entry-level stabilizers are only good for basic safety. This stabilizer is suitable for normal fluctuations. It is worth noting that if your area has a lot of fluctuations, use a V-Guard or Microtek Stabilizer that can withstand a lot of movement.

The Monitor Voltage Stabilizer is constructed of a copper transformer, which is the best electrical conductor and consumes less power than aluminum. It can also generate very little heat. During high voltage, this turns off the power. Because it only works on a specific voltage range, it saves your AC compressor.

This stabilizer can be used on both wall and floor-mountable surfaces.

It displays the input and output voltages from its LED light, as well as other modes of operation such as a high voltage warning.

Pros:

• High Voltage Cut-off protections.
• Intelligent Time Delay System (ITDS).
• Thermal Overload Protection.
• Cheapest Copper Voltage Stabilizers.

Cons:

• Not For High Voltage Fluctuations.
• Can’t rely on high electric fluctuations.

AULTEN AD2213 5 KVA 4000W

Specification:

Even if the voltage supply is low, this stabilizer is suitable for 1.5 and 2-ton ac (130 volts). The AULTEN AD2213 5(KVA 4000W) is a 130V-280V Digital Voltage Ac Stabilizer with a multi-function digital display that shows the input voltage as well as the stabilizer voltage, allowing you to understand the current-voltage situation.

It is made of metal and comes with wall-mountable accessories. That means you can mount this voltage stabilizer on the wall, near the AC, or even outside the room, even in an open space.

It also has an auto-cut feature in high and low-voltage situations, as well as a reverse countdown timer that starts the AC after a certain amount of time when power is cut off to protect your ac from a sudden impact.

You can choose this stabilizer for its digital display for the best stabilizer for 1.5-ton ac.

Pros:

• Affordable 5KVA Stabilizer.
• Long Warranty.
• Multi appliance support.
• Digital Display.
• Wall mounting
• Suitable for 1 ton, 1.5 ton and even 2 Ton AC.
• Microcontroller supports.
• Overload Protection.

Cons:

• Not a well-known brand.

Everest 4 KVA Triple Booster Digital Model

Specification:

Everest 4kv triple booster stabilizer covers the low and high voltage range from 90 volts to 300 volts and gives an output value of 200v to 240v. With its triple booster technology and copper winding under the body, you can use this stabilizer where voltage fluctuation is very high and also very low.

This Premium class AC stabilizer costs around Rs 7000 but offers a lot more; let’s learn more about it.

The Everest 4kv triple booster stabilizer allows the stabilizer to operate from low to high voltage (90v to 300v). Its time-delay system (ITDS) comes in handy during power outages. It starts the AC with a 10-second delay to protect your AC units from voltage surges.

It employs Spike protection technology to maintain a constant voltage output when other appliances are connected to the same power source line, which can disrupt power transmission and result in a short circuit or power outage.

It can detect the smallest voltage fluctuation change within a second and provide the desired output to your air conditioner thanks to advanced IC technology.

it is the best stabilizer for high voltage fluctuation and is finest as the best stabilizer for 1.5-ton AC in India.

Pros:

• Premium Stabilizer for 1.5 Ton Ac
• High and Low Voltage Cut-off protections
• Digital Display
• Solid State Circuitry
• Advanced IC
• Smart Output Voltage Correction
• Spike protection
• Intelligent Time Delay System (ITDS)
• Thermal Overload Protection
• Overload Protection
• Toroidal Transformers.

Cons:

• Overpriced.
• Bulky.

Bluebird 4 KVA Digital Voltage STABILIZER with HLC

Specification:

Bluebird is a dependable brand for Stabilizer, and it offers a wide range of models for various size and capacity ACs, as well as for various types of appliances. This Bluebird 4 KVA is an HLC Digital Voltage STABILIZER. The HLC (High Low Cut) feature protects against high and low electric fluctuations.

It has an Advanced Microcontroller Technology circuit for Efficient Output and Performance. Its specially designed Hoover transformer ensures low power consumption, making it one of the best 1.5-tonne AC stabilizers.

The Bluebird 4 KVA AC voltage stabilizer is designed to boost and buck output voltage by 20 – 30 Volts, which is less than other stabilizers but adequate for normal fluctuations. Its features such as a 15-second time delay, Toroidal transformer, and HLC make it one of the best AC stabilizers.

Considered as a low voltage fluctuation stabilizer for inverter and non-inverter AC in our top list.

Pros:

• HLC protection.
• Digital Display
• Spike protection
• Time Delay System (ITDS)
• Overload Protection
• Toroidal Transformers.
• Power efficient stabilizer.

Cons:

• No Thermal Overload Protection.

V-Guard iMagno 410 Inverter AC Voltage Stabilizer

Specification:

The V-Guard iMagno 410 is the successor to the company’s previous and best-selling model 400. The working range of this new model iMagno 410 AC Voltage Stabilizer is 170-270V AC current. This is the intermediate voltage stabilizer for a 1.5-ton AC that costs less than Rs 2500.

With minor voltage fluctuations in your area, this is a good option for your AC’s safety if you need an extra layer of protection.

You can stick this Voltage Stabilizer to the wall or beneath your AC. It is made of ABS material, which is heat and current-resistant. Furthermore, it employs cutting-edge technology such as an Advanced Microcontroller. Simply put, ITDS technology is an upgraded version of IC circuitry that provides surge protection from frequent restarts for more than 3 minutes.

The Advanced EMI Filter reduces the unwanted current in wires and functions as a silent voltage stabilizer. This stabilizer includes a three-digit digital display that shows the current voltage.

An in-built thermal sensor cuts power when the stabilizer overheats or excessive current consumption occurs, and it also has fuse protection when the load is exceeded. It also detects high and low voltage fluctuations and cuts power, saving the air conditioner compressor or PCB unit.

These features, combined with the lower price, make it one of the best stabilizers for an LG 1.5-ton inverter AC.

it is a quality product preferred for its display and elegant design suitable for your room design.

Pros:

• Best rating and is a low-budget AC stabilizer.
• EMI filter enabled.
• Low and high voltage cut-off.
• Smart output voltage correction.
• Intelligent Time Delay System (ITDS).
• thermal overload protection.
• Energy Efficient Stabilizer.

Cons:

• No such cons.

MICROTEK EM4160 Automatic

Specification:

With 8,037 ratings the MICROTEK EM4160 Automatic Voltage Stabilizer is the best-selling stabilizer on Amazon, and it is one of the budget–friendly stabilizers for 1.5-ton AC. This is the best high-voltage stabilizer for your 1.5-ton AC unit.

MICROTEK EM4160 comes with a metal body so you can use this stabilizer outside the home due to its durability, and you can mount this stabilizer on the wall with its wall-mounted installation. The capacity of this stabilizer is 160V to 285V but it can be used only to step down the voltage when it reaches above 250v. It also has high and low-voltage cut-off protection.

MicrotekEM4160 is built with aluminum winding, and it can give you perfect voltage fluctuation protection between 185v to 260v, it can regulate from 20V-35V with its aluminum transformer which is a con in our opinion, though its price range is lower so it is bearable.

It uses technology like a Time delay system (ITDS) which is 10 sec and also uses the Low and high-voltage cut-off feature.

Pros:

• Save your AC from Overload.
• Provide Wall mounting screws with a grip.
• Auto Start.
• Thermal Overload Protection.
• Best-selling best stabilizer for 1.5ton ac.

Cons:

• Basic design.
• Stabilize only 20v to 35v.
• Not a Copper transformer

FAQ

Conclusion

By reading this entire article on the Best AC Stabilizer for AC 1.5 Ton, you will be able to decide which stabilizer is best for your AC. You are free to choose the best piece for you from the various aspects, features, and technology. If you want to buy a balanced stabilizer, V Guard or Microtek stabilizers are ideal in all conditions.

The finest stabilizer for heavy voltage fluctuation is the Everest 4 KVA Triple Booster Digital Model. the second preference for normal voltage fluctuation as the best stabilizer is Microtek EM4130+ Automatic.

the latest one is a Monitor (100% Copper) if your budget is very limited.

Also, you can ask if you have any questions in the comment section.